Alesis ADAT-M20 Betriebsanweisung PDF herunterladen (Seite 59)

Chapter 10: Connecting Pro Tools to an ADAT-Compatible Digital Mixer 55

chapter 10

Connecting Pro Tools to an ADAT-Compatible

Digital Mixer

You can use your ADAT Bridge I/O to con-

nect your Pro Tools system with an ADAT-

compatible, ADAT optical-equipped digital

mixing console such as the Yamaha 02R,

Ramsa DA7, and others.

To connect the ADAT Bridge I/O to a ADAT-

compatible digital mixing console:

1 Follow the basic setup instructions previ-

ously given in “Primary Connections

(Bridge I/O to Pro Tools and ADAT)” on

page 10, but instead of making connec-

tions to an ADAT:

2 Connect an optical cable from Optical #1

Out on the ADAT Bridge I/O to optical in-

put #1 on the digital mixing console.

3 Connect a an optical cable from optical

output #1 on the digital mixing console to

Optical #1 In on the ADAT Bridge I/O.

4 Connect an optical cable from Optical #2

Out on the ADAT Bridge I/O to optical in-

put #2 on the digital mixing console.

5 Connect an optical cable from optical

output #2 on the digital mixing console to

Optical #2 In on the ADAT Bridge I/O.

6 If your digital console does not have the

ability to lock to the Word Clock signal car-

ried over these optical connections, con-

nect the Word Clock out of the

ADAT Bridge I/O to the Word Clock in of

the digital console. This is necessary for

both systems to be able to synchronize to

the same master clock reference.

☞ Refer to the documentation that came with

your digital console for additional installation

and operational information.

ADAT Bridge I/O linking between Pro Tools and a

digital mixing console

Computer

to Pro Tools card

Pro Tools Y-cable

Yamaha 02R or equivalent ADAT-optical equipped

digital mixing console

Digidesign ADAT Bridge

optical 1

Pro Tools card

optical in/out

50-pin

interface cables

in out

optical 2

in out

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Alesis ADAT-M20 Betriebsanweisung Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Alesis ADAT-M20