Alesis D4 Technical Information PDF herunterladen (Seite 15)

Ch 5: Editing Program Table and System Info - 13 - D4/DM5 Editor

SYSTEM

INFORMATION EDIT

WINDOW

The System Information Edit Window defines global MIDI settings,

configures the footswitch mode, and enables “note chase.”

Figure 16: System Information Edit Window

A Footswitch Mode: Configures the external footswitch jack for

“Hi Hat” triggers or program advance (“Advance”).

B Note Chase Enable: Enables or disables Note Chase, which allows

selection of a sound for editing by striking the appropriate trigger or

by sending the assigned MIDI note to the D4/DM5.

C Channel: Sets the D4/DM5’s MIDI channel. This parameter is only

enabled when Omni is set to “Off.”

D Omni: Enables or disables MIDI Omni mode, determining whether

the D4/DM5 responds to MIDI data on all channels or only to the

one set by Channel.

E Thru Enabled: Configures the D4/DM5’s MIDI Out jack as a MIDI

Thru jack. If this is inadvertently checked, MIDI feedback problems

may occur.

F Programs Enabled: Allows the D4/DM5 to respond to MIDI pro-

gram changes, based on its Program Change Table. If this box is not

checked, the unit will not respond to program changes.

G Controllers Enabled: Enables reception of MIDI continuous control-

ler messages, as described in the D4/DM5 manual.

1 2 ... 10 11 12 13 14 15

Arkady 26 Feb 2024 | 18:03:49

Ololo

Alesis D4 Technical Information Seite 15