Alesis iMultiMix 16 USB Spezifikationen PDF herunterladen (Seite 31)

5 Troubleshooting

If you’re having problems operating the iMultiMix16 USB, this

troubleshooting index will help you correct them.

Symptoms Cause Solution

Mixer is not plugged in or turne

on.

Plug in mixer and turn it on.

Faders are too low. Raise appropriate faders.

Control room level is turned

down

Turn up control room level.

The appropriate signal hasn’t

been assigned to the control

room out.

In the master section of the mixer,

be sure the right switch is selected

(MIX, ALT 3/4 or 2TK)

Cable is not plugged into output

jack.

Check outputs to make sure cables

are plugged in securely.

Headphones are not plugged

into PHONE jack.

Plug headphones into PHONE

jack.

Monitor or headphone amplifier

is turned off or down.

Turn amplifier on or up.

No sound from the mixer.

Bad cable.

Check all cables; substitute cables

ith known good ones.

Channel level is too high.

Set channel levels using the

procedure on page 12.

Channel input is too high.

Turn down your instrument to a

normal volume and then set channel

levels using procedure on page 12.

UX RET B level is too high.

Lower the level of AUX RET B in

the master section of the mixer.

MAIN MIX level is too high.

Lower the MAIN MIX fader in the

master section of the mixer.

udio signal is distorted.

LT 3/4 level is too high.

Lower the ALT 3/4 fader in the

master section.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Alesis iMultiMix 16 USB Spezifikationen Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Alesis iMultiMix 16 USB