Alesis i02 Bedienungsanleitung PDF herunterladen (Seite 4)

SYSTEM REQUIREMENTS

Minimum PC Requirements:

• Pentium III 450 MHz Processor

• 128 MB RAM

• Available USB 1.1 Port

• Windows XP (with Service Pack 2 installed)

Recommended PC Requirements:

• Pentium 4 or Athlon Processor

• 512 MB RAM

• 7,200 RPM Hard Disk Drive

• Available USB 1.1 Port

• Windows XP (with Service Pack 2 installed)

Minimum Macintosh Requirements:

• Any Apple computer with native USB support

• Mac OS X "Jaguar" version 10.2 or later

• 128 MB RAM

Recommended Macintosh Requirements:

• G4 733-MHz Processor or faster

• 7,200 RPM Hard Disk Drive

• Mac OS X "Jaguar" version 10.2 or later

• 512 MB RAM

AUDIO SETUP

The iO2 EXPRESS is a class-compliant device that can be

used with any digital audio workstation or recording software

that supports USB audio. To enable your iO2 EXPRESS to

send and receive audio to and from your computer, follow the

instructions below for your computer's operating system:

WINDOWS 7:

1. Use the included cable to connect the iO2 EXPRESS to your

computer.

2. Go to Start Menu  Control Panel  Hardware and

Sound  Sound.

3. Click the Playback tab and select USB Audio Codec* as the

default device.

4. Click the Recording tab and select USB Audio Codec* as

the default device.

5. Click Properties in the lower right-hand corner.

6. In the new window, click the Advanced tab and select 2-

channel, 16-bit, 44100 Hz (CD Quality) as the default

format.

7. Uncheck both boxes under Exclusive Mode.

8. Click the Levels tab and set the slider to "4."

9. Click OK to close the Properties window.

10. Click OK to close the Sound control panel.

WINDOWS VISTA:

1. Use the included cable to connect the iO2 EXPRESS to your

computer.

2. Go to Start Menu  Control Panel  Sound. (If you don't see Sound, select Switch to Classic View, and

the Sound Control Panel should become available.)

3. Click the Playback tab and select USB Audio Codec* as the default device.

4. Click the Recording tab and select USB Audio Codec* as the default device.

5. Click Properties in the lower right-hand corner.

6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as the

default format.

7. Uncheck both boxes under Exclusive Mode.

8. Click OK to close the Properties window.

9. Click OK to close the Sound control panel.

WINDOWS XP:

1. Use the included cable to connect the iO2 EXPRESS to your computer.

2. Go to Start Menu  Control Panel  Sounds and Audio Devices.

3. Click the Audio tab.

4. Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.

5. Click OK.

MAC:

1. Use the included cable to connect the iO2 EXPRESS to your computer.

2. Go to Applications  Utilities  Audio MIDI Setup.

3. In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input and

Default Output.

4. Close the window.

Be sure your audio software program is

set up to receive audio via the iO2

EXPRESS. This can usually be done in

your software's "Preferences" or

"Device Setup." Please consult your

software manual for more information.

* If you have other USB audio devices

connected to your computer, which may

have identical names, you may need to

try selecting each one until the iO2

EXPRESS is recognized.

If you experience too much latency

after adjusting your software latency

settings, we recommend the free

ASIO4ALL (Audio Stream Input/Output)

driver for PC at www.asio4all.com

ASIO drivers generally perform better

and with lower latency since they create

a more efficient communication

between audio devices and software.

1 2 3 4 5 6 7 8 9 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Alesis i02 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer Alesis i02