Alesis iO26 Bedienungsanleitung PDF herunterladen (Seite 6)

Rear Panel Tour

1. Headphone Outputs – Connect your headphones to these

outputs. The first headphone output always mirrors the

analog 1/2 output pair. The second headphone output is

assignable in software.

2. Main outputs (8 outputs on IO|26; 2 outputs on IO|14)

– Use ¼,” “TRS” cables to connect these outputs to the

balanced inputs of your powered speakers or power amplifier.

The IO|26 (shown above) has 8 outputs. The IO|14 has 2

outputs. If you are using the IO|26 and wish to connect

additional speakers, headphone amplifiers or hardware

processors, connect them to outputs 3 through 8.

3. Phono input (IO|26 only) – Connect your turntable to this

input.

If your turntable has a grounding cable, attach it to the

grounding screw to the upper right of the phono inputs.

This grounding will minimize humming and buzzing.

4. ADAT Lightpipe Inputs –Use ADAT-compatible optical

cables to connect to these inputs.

5. S/PDIF Connectors – Connect S/PDIF-enabled digital

devices using coaxial, RCA-terminated cables.

6. MIDI Connectors – Connect your keyboards, sound

modules, or other MIDI devices using 5-pin MIDI cables.

7. FireWire Connectors – Connect one of these plugs to your

computer’s FireWire port. You can use the other jack to

connect additional FireWire devices (such as hard drives) to

your computer.

8. Power Connector – Use the supplied AC adapter if your

computer does not provide sufficient Firewire bus power to

power the IO|14/26 or if you want to preserve battery

power.

9. Kensington Security Slot – This locking mechanism allows

you to secure your IO|14/26 to a desk or some other heavy

object using an optional third-party locking device.

The IO|14/26’s outputs are

“impedance balanced.” This

wiring method provides all of

the benefits of “fully

balanced” wiring when the

outputs are connected to

balanced gear. Furthermore,

impedance balancing, unlike

other balancing methods,

allows for trouble-free

connection to unbalanced

devices.

If an AC adapter is attached,

the IO|14/26 will use it.

FireWire bus power is only

used if no AC power is

available.

If you connect an ADAT or

S/PDIF input device (or

both), you will need to select

one of them as the “clock

master” in the IO’s control

panel.

The device you select as the

clock master will determine

the IO’s clock rate and will

be responsible for keeping all

of the digital signals

synchronized.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Alesis iO26 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker Alesis iO26